Technical Benefits of this HENZE Boron Nitride Solution:
HeBoCoat® diffusion barriers between sintered parts and sintering support plates
- prevent unwanted contact reactions - safely and reliably
- can be applied simply by brushing or spraying
- adhere firmly to the sintering plate
Uniform heat diffusion
during sintering
by means
of
- HeBoFill® Boron Nitride powder
- HeBoSint® Boron Nitride sintering capsules
HENZE offers:
- an unusually broad range of Boron Nitride products to meet all requirements in sintering and hardening
- expert advice regarding the application of Boron Nitride in sintering and hardening
- possibility of private labelling of HeBoCoat® spray cans
- just-in-time delivery thanks to a sophisticated logistics system
- possibility
of a
research and development partnership for innovative solutions
Sintering and Hardening safeguarded with HENZE Boron Nitride Systems
Carburisation may cause rejects
Unwanted carburisation reactions can occur during pressure sintering of diamond tools in graphite dies as well as during sintering of high performance ceramics on graphite support plates. Moreover, in sintering furnaces there frequently exists a danger of local overheating – these “hot spots” may cause unequal shrinkage of sintered parts. In all these cases costly rejects are the consequences.
Boron Nitride sintering aids from HENZE ensure process stability and fewer rejects
HeBoCoat® Boron Nitride diffusion barriers successfully prevent contact reactions even at high temperatures. They will also minimise friction between sintered parts and sintering support plates caused by unequal thermal expansion, and which may otherwise lead to warping of sintered parts.
HeBoCoat® will also protect graphite crucibles during siliconising.
HeBoFill® moulding powder and HeBoSint® sintering capsules serve to equalise the heat transfer to the work piece, thus safely eliminating hot spots.
Find a technical solution
in the area of sintering
and hardening!
Please contact us.
